Mobile Crossing WayPoint Map Loader Manuel de l'opérateur télécharger pdf (Page 88)

Most of the Furuno models use the proprietary sentences shown in the above display. The acronym stands for

"Proprietary Furuno Electric Company, GPS WayPoint List". The GP1650, Raychart 725, Raynav 300, and the Simrad

CP31 will use non-proprietary, standard NMEA $GPwpl sentences. That is, they will not have the $PFEC in front of the

sentence.

Reverse the procedure for sending points to the GPS but using the Upload to GPS button. The GPS should be set up

as below so that it is ready for the transfer. Follow the instructions below through step 5 prior to pressing Upload to

GPS.

Following the transfer, check the Waypoint list in the GPS to verify that all the waypoints made it.

For the earliest models, the name length is limited to 6 characters and the descriptions to 16. Later models like the GP33

allow 8 character names but only 13 character descriptions. Check your GPS's manual to verify your limits. You should

not send waypoints with duplicate names to a GPS as that may result in lost waypoints.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 129 130

Pas de commentaire

Mobile Crossing WayPoint Map Loader Manuel de l'opérateur Page 88